Waring PRO JEX450 Troubleshooting Guide download pdf (Page 12)

Move the toggle switch to the off position.

Unplug the juice extractor from electrical outlet.

Let motor cool down for approximately 5 to 10 minutes.

Press the black reset button located

on the bottom of the unit base.

Once the motor has cooled down, plug

unit into electrical outlet.

Move toggle switch to either low or

high to continue juicing.

CARE AND CLEANING/

TROUBLESHOOTING GUIDE

For easy cleaning: immediately after each use rinse

removable parts with hot soapy water to remove wet pulp.

Rinse with clean water. Allow parts to air dry. Or, place

removable parts on top shelf only of dishwasher. Note:

Froth/foam attachment is not dishwasher-safe and must be

washed by hand. Waring Pro

juice cover, filter bowl, pulp

container, filter basket and juice container are dishwasher

safe (top shelf only).

Wipe the motor base with a damp cloth.

Before washing juice collector cup, remove froth/foam

attachment and rinse under running water.

Note: Froth/foam attachment is not dishwasher-safe.

A nylon washing brush is the most effective way to clean

the filter basket. Using the brush, hold the filter basket

under cold running water and brush from the outside of the

basket. Then clean the filter basket in warm soapy water.

Always treat the filter basket with care as it can be easily

damaged. We recommend using an Oxo

cleaning brush.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Waring PRO JEX450 Troubleshooting Guide Page 12